If we are a Verizon FIOS customer, like myself, your setup and router might be negligence down your LAN speeds significantly. So what do we meant by LAN speed? Well, there is Internet speed and afterwards there is LAN or Local Area Network speed.
Your Internet speed can simply be checked by visiting a site like SpeedTest.net and creation certain a formula compare a speed you’re sealed adult for with FIOS. It’s value observant that we should customarily perform a speed exam regulating a mechanism connected around Ethernet wire given that will be a fastest.
In my home, we have 100/100 with FIOS and we simply get that Internet speed on my computers. The problem was not my Internet speed, buy my internal send speeds on my home network. When perplexing to send some information between opposite computers on my network, a speed maxed out during around 11.5 MB/s. That’s megabytes per second.
For a 100 Mbps (that’s megabits per second) network, 11.5 MB/s is a really good speed. However, all of my apparatus was gigabit enabled, definition we should get closer to 1000 Mbps in send speeds. That means around 125 MB/s. So as we can see, my stream speed of 11.5 is reduction than one tenth a limit speed for gigabit Ethernet.
Cause of Slower Speed
So what accurately is causing me to get customarily a 100 Mbps send rate? Two reasons: awaken cabling in my home and MoCA version. My residence was pre-wired with awaken cabling instead of Ethernet cabling and that creates a poignant difference. You will never get a max LAN speed probable or anywhere tighten to it when regulating awaken cabling.
However, even if we are stranded with coax, we can dramatically boost your speed by creation certain all your inclination are regulating MoCA 2.0 rather than MoCA 1.0 or 1.1. MoCA 1.0 maxes out during 12.5 MB/s and 1.1 maxes out during 21.875 MB/s. If this is confusing, make certain to review my prior post on bargain network send speeds.
So even yet my router and mechanism had gigabit ports, a wiring in my residence and a MoCA chronicle on my router was causing a speed to max out during 12.5 MB/s. By default, Verizon installs a Actiontec MI424WR router for new customers, even yet it’s not a best router they have.
This router is presumably red or black and grey like a picture shown above. Overall, it’s a good router and will give we glorious Internet speeds all a approach adult to 100 Mbps adult and 100 Mbps down. The downside is that it customarily supports MoCA 1.1 and therefore maxes out during 21.875 MB/s on your LAN network.
So because does this make a difference? Well, if we have your possess media server during home, streaming cinema from your mechanism or NAS to an HDTV or diversion console will be most slower and outcome in your videos pausing each integrate of seconds. we also backup my computers to my NAS and a slower send speed increases a backup time by hours, that is unsuitable for me.
Fix Slow LAN Speed
So how can we go about regulating this problem? Well, a easiest approach if we are forced to use awaken cabling is to ascent your router to a new Quantum Gateway router offering by Verizon. You can presumably lease it for $10 a month or buy it undisguised for $199.
The best approach to get a Quantum Gateway router for giveaway is to simply ascent your Internet speed by one devise and they will customarily give we a router for free. we was during 75/75 and upgraded to 100/100 and asked if they could chuck in a router too for free, that they did.
If they tell we that augmenting to that speed won’t validate you, afterwards usually ask to be upgraded to something aloft and afterwards revoke your speed after they ascent your router. For example, if we are during 25/25 and they contend they can’t give we a new router if we ascent to 50/50, usually contend we wish to ascent to 75/75. They will give we a new router for giveaway and afterwards we simply go online and revoke your speed to 50/50 dual days later. A Verizon deputy told me this trick!
If we can’t get a router that way, go to Amazon and we can get it for $142.50, saving you some money. You can also try on eBay and presumably measure a improved understanding there. The one we got and a one graphic above is a G1100 gateway router.
The router has several advantages over a Actiontec router in terms of wireless features, though for me, a biggest pull was a MoCA 2.0 support. Once we have this router installed, how do we get MoCA 2.0 speeds on your other devices?
Well, given my residence is connected around awaken everywhere, we had to buy some MoCA 2.0 adapters. The one we purchased was from Actiontec. It’s a MoCA 2.0 Coax to Ethernet adapter and it’s flattering expensive.
I connected this adapter to a awaken in my wall and connected a Ethernet out to a switch, that was connected to all my other inclination like computers, etc. So what kind of speed alleviation did we see? Well, baseline MoCA 2.0 can give we speeds adult to 400 Mbps, that translates into about 50 MB/s. In my possess tests, a speed increasing to about 54 MB/s. This was roughly 5 times faster than my prior speed!
There is also an extended MoCA 2.0 speed, that gives we a throughput adult to 800 Mbps, though it has to be a connected awaken connection. There is a connected MoCA adapter like a one shown above from Actiontec, though a G1100 router customarily supports MoCA 2.0 not connected MoCA 2.0, so we can’t get those aloft speeds.
Even Faster Speeds?
So can we get even faster speeds than a 50 MB/s we mentioned above? Yes, though it requires a lot some-more work. Basically, we have to switch your Verizon ONT from awaken to Ethernet and afterwards get some Ethernet ports commissioned in your house.
I’m going to write a destiny post on how do to this as that is now what I’m doing in my possess residence and it’s not as difficult as it might seem. Once we switch a ONT to Ethernet and get an Ethernet pier nearby your devices, we can get send speeds adult to 90+ MB/s, that is about as tighten to a fanciful 125 MB/s as we can get. If we have any questions, feel giveaway to comment. Enjoy!